Passat Sedan V6-3.6L (BLV) (2008)
-
Thread belt anchor from seat belt through opening in trim.
Installation
-
Slide seat belt height adjuster to the topmost position.
-
Position slide in trim in highest position.
-
Further installation is in reverse order of removal.
After installation, perform the following function test on the belt height adjuster:
-
Operate height adjuster slide and position height adjuster in highest position.
-
Pull seat belt down.
-
Height adjuster must engage in highest lock position when doing so!
Lower B-Pillar Trim
Pillar Trim
Lower B-Pillar Trim
‹› Removing and installing on the left side of the vehicle is described here. Removing and installing on the right side is identical.
Removal
-
Remove upper B-pillar trim (the belt anchor must not be removed form body), refer to => [ Upper B-Pillar Trim ].