Passat Sedan V6-3.6L (BLV) (2008)
-
Remove the A/C Display Control Head, Climatronic (E87) and Climatronic Control Module (J255).
-
Remove rear trim. Refer to => [ Rear Trim ] See: Rear Trim
-
Remove the two bolts - 1 -.
-
Remove the two nuts - 2 -.
‹› In order to remove screws - 4 -, - 6 -,- 7 - and - 8 -, seats must be moved accordingly.
-
Remove cover cap - 3 - and remove screw - 4 -.
-
Remove cover cap - 5 - and remove screw - 6 -.
-
Remove bolts - 7 - and - 8 -.
-
Raise center console in rear area.
Vehicles with an AUX-In socket in the center console
-
Remove the AUX IN socket.
-
Loosen the center console from the centering tabs - 9 - in the center console.
Installation
-
Insert center console in the two centering tabs - 9 - in instrument panel.
‹› Check whether heating and cooling channels - 10 - are precisely fit to the heating and cooling channels in the center console.