Passat Sedan V6-3.6L (BLV) (2008)
Installation
-
To install, perform the steps used for removal in reverse order.
Glove Compartment
Storage Compartments, Covers and Trim
Glove Compartment
Removal
-
Switch off ignition.
-
Remove 7 bolts - 1 -, - 2 -, and - 3 - (1.5 Nm).
-
Insert a small screwdriver in the opening - arrow - at lower end of glove compartment and release catch.
-
Loosen glove compartment from instrument panel.
-
In vehicles with glove compartment cooling, disconnect A/C channel from glove compartment.
-
Disconnect wiring harness from lights and contact switch.
-
In vehicles with footwell lights, disconnect wiring harness from lights.
-
In vehicles with front passenger airbag shut-off, disconnect wiring harness from key switch.