Passat Sedan V6-3.6L (BLV) (2008)
/Page-2344029.png)
Installation
-
To install, perform the steps used for removal in reverse order.
Driver Side Footwell Cover
Storage Compartments, Covers and Trim
Driver Side Footwell Cover
Removal
-
Switch off ignition.
-
Remove the two bolts - 1 - (1.5 Nm).
-
Remove cover from mounts and disconnect wiring harness (if installed) from footwell lights.
-
Press the two locking mechanisms - arrows - and disconnect diagnostic connector from cover.
