Passat Sedan V6-3.6L (BLV) (2008)
Trunk / Liftgate Lock: Service and Repair
Rear Lid
Rear Lid Lock
‹› If the rear lid does not open, use the emergency release inside the rear lid trim panel and open it manually. Refer to the Owner's Manual.
Removing
-
Remove the rear lid trim panel.
‹› Unclip the emergency release cable - 4 - on the lock while removing the rear lid trim panel.
-
Disconnect connector - 2 - from lid lock - 1 -.
-
Remove the hex nuts - 3 - and remove lid lock - 1 - from the rear lid.
Installation
-
Position the lid lock - 1 - on the rear lid and install hex nut - 3 -.