Passat Sedan V6-3.6L (BLV) (2008)
‹› All angle brackets - 4 - are installed. Refer to=> [ Roof rail Angle Bracket ]
-
Place roof rail - 1 - on roof - 2 -. Do this beginning with front threaded screws - 5 -.
-
Tighten the nut - 3 - to 23 Nm.
Roof rail Angle Bracket
Removing
‹› If angle bracket is to be re-installed, make sure conical washers remain in tolerance compensations in their places.
‹› The various conical washers must not be interchanged.
-
Remove roof rail - 5 -.