Passat Sedan V6-3.6L (BLV) (2008)
/Page-2501002.png)
-
Remove any adhesive residue with the (VAS 6349) radial disc.
-
Thoroughly clean the adhesive surface with adhesive remover D 002 000 10 right before installing the outer door seal.
‹› The adhesive surface must be free of dust, grease and adhesive residue.
-
Vulcanized point - arrow - on the outer door seal is located in center area of door entry sill.
-
Remove the film covering the adhesive and apply the seal to the door. Do not stretch outer door seal excessively so that the seal is not too long at
the end.
