Passat Sedan V6-3.6L (BLV) (2008)
-
Press the protective cap with the assembly tool - 1 - and the piston resetting tool - 2 - into the brake caliper so that it contacts the brake caliper all
around.
Check Seating of Protective Caps
-
Protective cap must no longer be able to be pulled from brake caliper by hand.
-
Lightly press piston against protective cap with an extension and ratchet adapter - 1 - and hold it there, in that position.
Do not angle piston, to avoid damaging the seal sleeve.
-
Blow the protective cap on with pressurized air (max. 3 bar) - 2 -. Protective cap springs onto piston.
-
Press piston with hand into brake caliper, possibly push back slightly with piston resetting tool.
Outer sealing lip of protective cap will then engage in piston groove.
Piston, Rear Brake Caliper
Piston, Rear Brake Caliper
Special tools, testers and auxiliary items required
‹› Trim Removal Wedge (3409)
Removing
-
Rotate the spindle - arrow movement - using a TORX(R) insert T45.