Passat Sedan V6-3.6L (BLV) (2008)
Brake Master Cylinder: Service and Repair
Brake Master Cylinder
Brake Master Cylinder
Special tools, testers and auxiliary items required
‹› Brake Filler/Bleeder Unit (VAS 5234)
‹› Torque Wrench (V.A.G 1331)
Removing
-
If the vehicle has a coded radio, get the radio code from the customer before beginning.
-
Disconnect battery.
-
Remove intake hose, air filter housing (on vehicles with diesel engine and some gasoline engines) and battery.
On vehicles with 6-cyl. gasoline engine, battery is in luggage compartment, accordingly only air filter housing must be removed.
-
Remove the battery carrier.
-
Place sufficient lint-free cloths in the area of the engine and transmission.
-
Extract as much brake fluid as possible from the brake fluid reservoir. Use the brake charger/bleeder unit (VAS 5234) or (V.A.G 1869/4).
For Vehicles with Manual Transmission
-
Disconnect the clutch slave cylinder return hose - B - and secure it out of the way or clamp it off with a commercially available tool such as the Ha
4590 and then remove it.
All Vehicles
-
Remove the connector - A - from the brake fluid level warning switch (F34).
-
Pull off connector - C - from brake lamp switch (F).
-
Remove brake fluid reservoir, press the engagement straps toward outside at reservoir and simultaneously pull brake fluid reservoir out of sealing