Passat Sedan V6-3.6L (BLV) (2008)
Vacuum Pump: Service and Repair
Mechanical Vacuum Pump
Mechanical Vacuum Pump
‹› A mechanical vacuum pump is installed from 11.06.
Removing
-
Remove the air guide cover - 1 -, disengage the clips sideways to do so.
-
Remove the air duct - 2 -.
-
Remove the air filter housing and connecting hose, while doing this remove the bolt - A -, disconnect the connector - B - and remove the spring
clip - C -. When reinstalling, observe the mark - D -.
-
Disconnect the vacuum line - A -.