Passat Sedan V6-3.6L (BLV) (2008)
/Page-1304002.png)
^
Switch ON ignition.
^
While applying brake pedal, operate EPB switch two cycles (ON-OFF).
Tip:
Allow 30 seconds between each EPB switch selection to allow the parking brake to react.
Once EPB switch cycles have been completed:
^
Read and clear fault memory.
Tip:
At this point, if unable to perform basic settings procedure, contact technical assistance by selecting the "Technical Assistance" tab in ElsaWeb
and follow the instructions to obtain a 6 digit access code.
Warranty
Information only.
Required Parts and Tools
No Special Parts Required.
Additional Information
All part and service references provided in this Technical Bulletin are subject to change and/or removal. Always check with your Parts Dept. and Repair
Manuals for the latest information.
