Passat Sedan V6-3.6L (BLV) (2008)
Fan Shroud: Service and Repair
Fan Shroud with Fans
Special tools, testers and auxiliary items required
‹› Torque Wrench (5-50 Nm) (V.A.G 1331)
Removing
-
Remove the air guide bolts - arrows - and remove the intake air guide - A -.
-
Remove the upper fan shroud bolts - upper arrows -.
-
Remove the noise insulation.
-
Unclip the coolant hose from the fan shroud.
-
Disconnect the connector - 1 - and remove the lower fan shroud bolts - lower arrows -.