Passat Sedan V6-3.6L (BLV) (2008)
/Page-549003.png)
Without a Mechanical Vacuum Pump
-
Secure the position of the high pressure pump sprocket using (T10332).
‹› If the opening in the high pressure pump sprocket is not at the top: remove the (T10068 A). Rotate the crankshaft further in the direction of
rotation until this position has been reached and the (T10068 A) and (T10332) can be installed.
With a Mechanical Vacuum Pump
-
Secure the position of the high pressure pump sprocket using (T10363). The mark - A - on the high pressure pump sprocket must be at the top.
