Passat Sedan V6-3.6L (BLV) (2008)
Variable Valve Timing Cover / Housing: Service and Repair
Control Housing Overview
1
Guide rail
‹› Clipped to the control housing.
2
Control Housing
3
Camshaft Adjustment Valve 1 (N205)
‹› Removing and installing, refer to => [ Camshaft Adjuster Valves ] See: Variable Valve Timing Actuator/Service and Repair/Camshaft
Adjuster Valves.
4
Camshaft Adjustment Valve 1 (Exhaust) (N318)
‹› Removing and installing, refer to => [ Camshaft Adjuster Valves ] See: Variable Valve Timing Actuator/Service and Repair/Camshaft
Adjuster Valves.
5
Bolt
‹› 8 Nm
‹› Install using locking fluid (D 000 600 A2).
Checking Control Housing Strainer for Contaminants
-
Unclip the strainer - 2 - from the rear of the control housing - 1 - and remove and contaminants.