Passat Sedan V6-3.6L (BLV) (2008)
Crankshaft Seal Retainer: Locations
Sealing Flanges and Drive Plate Assembly Overview
Note:
^
Secure engine to engine and transmission stand VAS 6095 when working on engine.
1. 100 Nm + 1/2 turn (180 degree)
2. Vibration damper
^
To remove and install, secure using counter-holder tool T10069
3. 10 Nm
4. Sealing flange
^
Coat sealing surfaces with sealant D 176 501 A1
5. Cylinder block
6. Sealing flange
7. Seal
^
Remove using pulling hook T20143/2
^
PTFE version of oil seal
^
Do not oil or grease sealing lip of oil seal.
^
Before installing, remove oil remains from crankshaft journal with a clean cloth
8. Shim
9. 60 Nm + 1/4 turn (90 degree)
^
Replace
^
To loosen and tighten, use retainer T10044 (with 5 mm spacers) or counter-holder tool T10069.
10. Washer
11. Drive plate
12. 23 Nm