Passat Sedan V6-3.6L (BLV) (2008)
-
Clean the top and bottom of the cylinder head gasket, it must be free of oil and grease.
-
Cut the tube nozzle at the front mark (nozzle diameter approximately 2 mm).
-
Lightly apply lubricant to the top and bottom cylinder head gasket sealing surfaces by bending the gasket down slightly again - arrows -.
-
To lubricate the surface between the cylinder head and gasket, use a flat object, for example, a feeler gauge.
-
Place a thin sealant bead - arrows - from below in both corners between the cylinder head gasket and cylinder block so that the cylinder head
gasket holes are filled.