Passat Sedan V6-3.6L (BLV) (2008)
A Tighten the bolts - 1 - to 5 Nm.
B Tighten the bolts - 2 - to 23 Nm.
C Tighten the bolts - 1 - to 10 Nm.
The rest of the installation is performed in reverse order of removal, noting the following:
-
Install the seal. Refer to => [ Sealing Flange Seal, Transmission Side ] See: Seals and Gaskets/Crankshaft Main Bearing Seal/Service and
Repair/Sealing Flange Seal, Transmission Side.
-
Install the oil pan. Refer to => [ Oil Pan ] See: Engine Lubrication/Oil Pan/Service and Repair.
-
Install the drive plate. Refer to => [ Drive Plate ] See: Transmission and Drivetrain/Flex Plate/Service and Repair/Drive Plate.
-
Install the transmission.