Passat Sedan V6-3.6L (BLV) (2008)
Engine Accessory Bracket: Service and Repair
Accessory Bracket
Removing
-
Remove the ribbed belt. Refer to => [ Ribbed Belt ] See: Drive Belt/Service and Repair/Ribbed Belt.
-
Remove the generator.
-
Remove the Air Conditioning (A/C) compressor.
-
Remove the accessory bracket.
Installing
-
Tighten the bolts - 2 and 4 - hand tight.
-
Then tighten bolts - 1, 3 and 5 - hand tight.
-
Tighten all bolts to 23 Nm in a diagonal sequence.