Passat Sedan V6-3.6L (BLV) (2008)
Idler Pulley: Service and Repair
Ribbed Belt Pulley With Freewheel, Removing and Installing - Mfr: Valeo
Ribbed Belt Pulley With Freewheel, Removing And Installing - Mfr: Valeo
Special tools, testers and auxiliary items required
-
Multi-point adapter VAS 3400
-
Torque wrench VAG 1332 (or 40 - 200 Nm equivalent)
-
TORX screwdriver insert VAG 1603/1
Removing:
-
Remove generator.
-
Tighten the generator in a vise at the attachment points.
-
Remove protective cap from ribbed belt pulley with freewheel.
-
Insert multi-point adapter VAS 3400 into ribbed belt pulley with freewheel of generator using ring wrench 17 mm.