Passat Sedan V6-3.6L (BLV) (2008)
/Page-624003.png)
-
Install the oil pan immediately and tighten all oil pan bolts lightly.
-
Hand tighten the oil pan to transmission bolts just enough so that the oil pan contacts the transmission.
‹› With the transmission removed, the oil pan must seal flush with cylinder block.
-
Tighten the oil pan to cylinder block bolts to 11 Nm.
-
Tighten the oil pan to transmission bolts to 45 Nm.
The rest of the installation is basically a reverse of the removal sequence.
