Passat Sedan V6-3.6L (BLV) (2008)
Intake Manifold: Locations
One Piece Intake Manifold
Intake Manifold Assembly Overview
Check vacuum reservoir in intake manifold for leaks.
1
-
8 Nm
2
-
Guide tube
-
For oil dipstick
3
-
6 Nm
4
-
Bracket
-
For Intake Manifold Runner Control (IMRC) valve N316
5
-
Intake Manifold Runner Control (IMRC) valve N316
6
-
Seal
-
Replace
7
-
Vacuum actuator
-
For intake manifold flaps
-
Make sure intake manifold flaps are in position when installing: Intake manifold flaps must be opened
-
Checking vacuum actuator for intake manifold flaps.
8
-
Intake manifold
-
Checking with vacuum reservoir installed.
-
With intake manifold flaps
9
-
From evaporative emission (EVAP) canister purge regulator valve N80
10
-
From Leak Detection Pump (LDP) V144
11
-
20 Nm
12
-
To suction jet pump
-
Suction jet pump assembly overview.
13
-
Grommet
-
Replace if damaged
14
-
To Intake Manifold Runner Control (IMRC) valve N316