Passat Sedan V6-3.6L (BLV) (2008)
Intake Manifold: Locations
Two Piece Intake Manifold
Intake Manifold Assembly Overview
1
-
10 Nm
2
-
Intake manifold, upper
3
-
Grommet
-
Replace if damaged
4
-
To brake booster
5
-
10 Nm
6
-
From evaporative emission (EVAP) canister purge regulator valve N80
7
-
20 Nm
8
-
Rear intake manifold support
9
-
Seal
-
Replace
10
-
7 Nm
11
-
Throttle valve control module J338
-
With throttle drive (for Electronic Power Control (EPC)) G186, throttle drive angle sensor 1 (for Electronic Power Control (EPC)) G187
and throttle drive angle sensor 2 (for Electronic Power Control (EPC)) G188
-
When replacing, adapt the engine control module to the throttle valve control module ; "Guided Functions".
12
-
3.5 Nm
13
-
Connection
-
For crankcase ventilation
-
With Positive Crankcase Ventilation (PCV) heating element N79
-
From cylinder head cover
14
-
Front intake manifold support
15
-
Gasket
-
Replace
-
Coat lightly with engine oil before installing and insert in the intake manifold upper section.
16
-
Gasket