Passat Sedan V6-3.6L (BLV) (2008)
-
Disconnect the connector from the throttle valve control module.
-
Disconnect the connector from the ignition coils with power output stages (N70, N127, N291, N292, N323, N324).
-
Remove the ignition coils with power output stages. Refer to => [ Ignition Coils with Power Output Stages ] See: Powertrain Management/Ignition
System/Ignition Coil/Service and Repair.
-
Remove the wiring harness for the ignition coils with power output stages from the intake manifold.
-
Remove the high pressure pump. Refer to => [ High Pressure Pump ].
-
Remove fuel rail connecting pipe - arrows -.
-
Remove the noise insulation.
-
Remove the transmission fluid line bolt - arrow - from the transmission. Catch any leaking transmission fluid.