Passat Sedan V6-3.6L (BLV) (2008)
/Page-637027.png)
arrow -.
-
Turn the (T10133/14) around (knurled side no longer faces toward fuel injector). Slide the (T10133/14) over the support washer - 1 - in the -
direction of the arrow - to the stop on the (T10133/12).
-
Remove the (T10133/14).
Support washer is now the correct size.
-
Install a new spring - 1 - for (T10133/12) and place a new O-ring - 3 - in front of the support washer - 2 -.
‹› The Teflon seal - arrow - must NOT be lubricated when installing the fuel injector.
