Passat Sedan V6-3.6L (BLV) (2008)
‹› Tighten uniformly, starting from the inside and working toward the outside.
‹› Removing and installing, refer to => [ Lower Intake Manifold, with Fuel Rail ] See: .
27
Bolt
‹› 30 Nm + 90° (1/4) additional turn.
‹› Replace
‹› Tighten the fuel rail uniformly, starting from the inside and working toward the outside.
28
Fuel Pressure Sensor (G247)
‹› 22 Nm
‹› Before assembly, lubricate the front sealing point and threads with clean motor oil.
29
Cap
‹› 22 Nm
30
Pressure Relief Valve
‹› Lightly lubricate the O-rings with clean engine oil before installing.
‹› Replace the removed valve.
‹› Press in by hand using a 8 mm hex wrench.
31
O-ring
‹› Replace
‹› Before installing, lubricate with clean engine oil.
Air Filter Housing Overview