Passat Sedan V6-3.6L (BLV) (2008)
Crankshaft Main Bearing Seal: Service and Repair
Sealing Flange and Drive Plate Overview
Sealing Flange and Drive Plate Overview
1
Bolt
‹› 100 Nm + 180° (1/2) additional turn.
‹› Replace
‹› Removing and installing, refer to => [ Vibration Damper ] See: Cylinder Block Assembly/Harmonic Balancer - Crankshaft Pulley/Service and
Repair.
2
Vibration Damper
‹› Removing and installing, refer to => [ Vibration Damper ] See: Cylinder Block Assembly/Harmonic Balancer - Crankshaft Pulley/Service and
Repair.
3
Bolt
‹› 10 Nm
4
Sealing Flange
‹› Replacing, refer to => [ Sealing Flange, Vibration Damper Side ] See: Cylinder Block Assembly/Sealing Flange, Engine Front/Service and
Repair.
‹› Apply sealant (D 176 501 A1) to the sealing surfaces.