Passat Sedan V6-3.6L (BLV) (2008)
-
Separate the (T10122/1) from the (T10122/2)
-
Place the (T10122/2) with a dry seal onto the crankshaft.
-
Drive in the seal into the sealing flange until seated using (T10122/3).
-
Separate the (T10122/1) from the (T10122/2)
-
Place the (T10122/2) with a dry seal onto the crankshaft.
-
Drive in the seal into the sealing flange until seated using (T10122/3).