Passat Sedan V6-3.6L (BLV) (2008)
-
Make sure that the alignment bushing - 1 - is installed. It is used to secure the (T10332).
-
Also secure the position of the drive pinion for the high pressure pump using (T10332).
With a Mechanical Vacuum Pump
-
Install the drive gear - 1 - with the chain mounted. Make sure the chain lies taut on the guide rail.
‹› The notch - arrow - must face upward.
-
Lubricate the input shaft - 4 - with clean engine oil and install it.