Passat Sedan V6-3.6L (BLV) (2008)
-
Make sure that alignment bushing - 5 - is installed. It is used to secure the (T10363).
-
Also secure the position of the drive pinion for the high pressure pump using (T10363). The mark - A - on the high pressure pump sprocket must
be at the top.
Continuation for All
-
Install the camshaft adjuster, refer to one of the following:
=> [ Vehicles through 11.08 ] See: Variable Valve Timing/Variable Valve Timing Actuator/Service and Repair/Camshaft Adjuster With
Timing Chain, Installing.
=> [ Vehicles from 12.08 ] See: Variable Valve Timing/Variable Valve Timing Actuator/Service and Repair/Camshaft Adjuster With Timing
Chain, Installing.