Passat Sedan V6-3.6L (BLV) (2008)
/Page-665005.png)
-
If replacing the seals in the cover, refer to => [ Timing Chain Cover Seal, Installing ] See: Seals and Gaskets/Front Crankshaft Seal/Service and
Repair.
-
Make sure the seal - arrows - fits correctly inside the cylinder head cover.
-
If necessary, remove sealant residue in places - A -.
-
Apply a thin bead of sealant (D 176 501 A1) to the sealing surfaces on the cylinder head cover.
-
Apply some sealing compound (D 454 300 A2) to the places marked on cover - arrows -.
‹› The sealant (D 176 501 A1) hardens quickly.
-
Slide the timing chain cover, at a slight angle, onto the camshaft adjustment valves. Ensure the cylinder head cover seal is not pressed back.
