Passat Sedan V6-3.6L (BLV) (2008)
-
Tighten new engine mount to engine mount bracket bolts to : 60 Nm + 90° (1/4) additional turn.
-
Install the pendulum support.
‹› For the pendulum support bolt tightening specifications, refer to => [ Fastener Tightening Specifications ] See: Specifications/Engine Assembly -
Fastener Tightening Specifications.
-
Install the ribbed belt. Refer to => [ Ribbed Belt ] See: Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and Repair/Ribbed Belt.
-
Fill the cooling system. Refer to => [ Draining and Filling ] See: Cooling System/Service and Repair/Procedures/Draining and Filling.