Passat Sedan V6-3.6L (BLV) (2008)
Exhaust Manifold: Service and Repair
Exhaust Manifold, Front Exhaust Pipes With Catalytic Converters and Front Mufflers Overview
Exhaust Manifold, Front Exhaust Pipes with Catalytic Converters and Front Mufflers Overview
‹› Some vehicles have an additional oxygen sensor installed after the catalytic converters - item 20 -. Both sensors are actually connected but do not
function.
1
Connector
‹› Brown, 6 pin
2
Heated Oxygen Sensor (HO2S) 2 (G108),
‹› 50 Nm
‹› Bank 2, sensor 1.
‹› Installed in the exhaust gas stream of cylinders 4, 5 and 6.
‹› Lubricate the threads only with (G 052 112 A3); do not let the (G 052 112 A3) get onto the slits of the oxygen sensor body.
‹› Removing and installing, refer to => [ Heated Oxygen Sensor and Heated Oxygen Sensor 2 ] See: Powertrain Management/Computers and
Control Systems/Oxygen Sensor/Service and Repair/Removal and Replacement/Heated Oxygen Sensor and Heated Oxygen Sensor 2.
3
Nut
‹› M8 - 25 Nm