Passat Sedan V6-3.6L (BLV) (2008)
Muffler: Service and Repair
Center and Rear Muffler Separating
Center and Rear Muffler Separating
‹› A separating point has been provided in the connecting pipe for removing, installing and individual replacement of the center or rear muffler.
‹› The separating point is marked by a depression around the circumference of the exhaust pipe.
Special tools, testers and auxiliary items required
‹› Body Repair Saw (V.A.G 1523 A)
or
‹› Chain Pipe Cutter (VAS 6254)
‹› Protective Eyewear
Procedure
CAUTION!
To prevent injuries from metal shavings, wear protective goggles and protective clothing.
-
Cut the exhaust pipe at the separation point - arrow - using (V.A.G 1523 A) at a right angle.
-
Position the clamping sleeve at the side marks when installing.
-
When installing the clamping sleeve, ensure that the bolt end - arrow - does not project beyond the lower edge of the clamping sleeve.