Passat Sedan V6-3.6L (BLV) (2008)
Left Temperature Door Motor
Removing
-
Remove left footwell vent. Refer to => [ Left Footwell Vent ] See: Air Register/Service and Repair/Removal and Replacement.
-
Remove the left footwell trim.
-
Remove Data Bus On Board Diagnostic Interface (J533).
-
Remove the bolts - 3 - (9 ± 1.3 Nm).
-
The bolts - 1 - are not to be removed.
-
Do not remove the bracket - 2 -.
-
Push the bracket toward the brake pedal - arrow - and fasten it there using a cable tie.
-
Mark connector - C - to control motor (danger of interchange with other connectors of same construction).