Passat Sedan V6-3.6L (BLV) (2008)
/Page-1774002.png)
‹› Position of air flow door must not be changed.
Installing
Installation is performed in the reverse order; when doing this note the following:
The Fresh Air/Recirculating Air/Back Pressure Door Motor (V425) fits in only one position on the curved washer.
‹› After installing, check the function of the back pressure and recirculation door.
‹› Initiate "Basic Setting" function with Vehicle Diagnosis, Testing and Information System (VAS 5051B) (or succeeding model). Refer to => [
Climatronic A/C System, Checking and Adjusting Components ] See: Testing and Inspection/Component Tests and General
Diagnostics/Climatronic A/C System, Checking and Adjusting Components.
