Passat Sedan V6-3.6L (BLV) (2008)
Control Assembly: Locations
A/C Display Control Head Overview (Passat, Climatronic System)
1
-
Display of selected interior temperature, left side
2
-
Button for air recirculation
-
Press button for recirculating air function to prevent polluted air from entering interior.
3
-
Button - center air distribution
4
-
Button - lower air distribution
5
-
Button f- upper air distribution
6
-
Display of selected interior temperature, right side
7
-
Button for recirculation or automatic recirculation
-
When the recirculation button is pressed, recirculation mode is activated and prevents polluted air from entering the vehicle interior.
-
Vehicles through calendar week 22/07. Pressing the recirculation button again activates the automatic recirculation function.
NOTE:
-
Only for vehicles with an air quality sensor G238.
-
Air quality sensor G238 function.
8
-
Windshield defrost button
9
-
Push button for rear window defroster
10
-
Rotary button for interior temperature, left side
11
-
Blower regulator
-
Changed blower speed by turning.
12
-
Push button DUAL
-
For vehicle from calendar week 22/07
-
If the indicator light in the button comes on, different temperatures can be set for left and right.
-
If the button Dual is pressed and -the indicator light goes out-, the drivers side temperature control also controls the passengers side.
NOTE:
-
On vehicles with auxiliary heater (parking heater function), the Immediate Heating Button E537 is in this location.
-
In order to switch on the dual function on vehicles with auxiliary heating, press the Auto button for 3 seconds.