volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Cigarette Lighter Assembly Overview|Page 9547 > < Cigarette Lighter Assembly Overview|Page 9545
Page 2
background image

-

Pull receptacle with puller out of mounting sleeve.

CAUTION!
The outlet electrical wiring can be damaged.

Pay attention to the lengths of the electrical wires when removing the outlet.

Depending on installation location, it is recommended to use press 40148/1 - 2 - with knurled wheel - 1 -.

CAUTION!
Make careful not to damage any of the surrounding components when using the press.

-

Disconnect electrical connection.

‹› There are different versions of the power outlet and cigarette lighter outlet due to different mounting locations and construction. The differences

are primarily In the length and type of electrical connectors. On power outlets and cigarette lighters with an electrical cable pig tail, additional
work may be necessary to access the connector.

-

Release puller retainers by pressing spindle - 1 - in direction of - arrow B -. Then release press - 2 - by turning slightly to left - arrow A -.
Remove the puller from the outlet.

Cigarette Lighter Assembly Overview|Page 9547 > < Cigarette Lighter Assembly Overview|Page 9545