Passat Sedan V6-3.6L (BLV) (2008)
Drive Belt: Service and Repair
Ribbed Belt Pulley Without Freewheel
Ribbed Belt Pulley Without Freewheel
Special tools, testers and auxiliary items required
‹› Socket (VAS 3310)
‹› Torque Wrench (V.A.G 1332)
Removing:
-
Remove generator, refer to => [ Generator ] See: Starting and Charging/Charging System/Alternator/Service and Repair/Removal and
Replacement/Generator (2.0L) or => [ Generator ] See: Starting and Charging/Charging System/Alternator/Service and Repair/Removal and
Replacement/Generator (3.6L).
-
Tighten the generator in a vise at the mounting point.
-
Use the (VAS 3310) to remove the ribbed belt pulley nut from the generator shaft.
Installing:
Install in reverse order of removal, noting the following:
-
Tighten all threaded connections to the specification shown in => [ Fastener Tightening Specifications, Generator, All Vehicles ] See:
Specifications/Mechanical Specifications/Starting and Charging/Alternator/Fastener Tightening Specifications, Generator, All Vehicles.