Passat Sedan V6-3.6L (BLV) (2008)
Fluid - A/T: Service and Repair
Automatic Transmission Fluid Level, Checking and Filling
Automatic Transmission Fluid Level, Checking and Filling
Please observe the notes:
‹› About this repair information, refer to => [ General Repair Information ] See: Transmission and Drivetrain/Automatic
Transmission/Transaxle/Service and Repair/Procedures/General Repair Information.
‹› About the Automatic Transmission Fluid (ATF), refer to => [ Automatic Transmission
Fluid ] See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Service and Repair/Procedures/General Repair Information.
‹› About the filling tube, refer to => [ Transmission With and
Without Filling Tube ] See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Service and Repair/Procedures/General Repair Information.
Special tools, testers and auxiliary items required
‹› Torque Wrench (5-50 Nm) (V.A.G 1331)
‹› Used Oil Collection and Extraction Device (V.A.G 1782)
‹› Vehicle Diagnostic, Testing, and Information System (VAS 5051)
‹› Drip Tray for VAS 6100 (VAS 6208)
‹› Adapter for Oil Filling (VAS 6262)
‹› Adapter for Filling ATF Oil (VAS 6262/2)
If ATF is filled, only use ATF available as a replacement part.
-
If the ATF level is checked, the seal - arrow - on the ATF inspection plug must always be replaced.