Passat Sedan V6-3.6L (BLV) (2008)
Fluid - A/T: Service and Repair
Automatic Transmission Fluid, Draining and Filling
Automatic Transmission Fluid, Draining and Filling
-
Turn off the engine.
-
Remove the inspection plug from the oil pan - arrow - to check the Automatic Transmission Fluid (ATF).
-
Remove the overflow tube - 1 - through the inspection hole.
-
Drain the ATF.
-
Install the overflow tube.
-
Install the inspection plug hand tight.
-
Add 3 liters of ATF through the fill tube.
-
Start the engine, shift through all selector lever positions, you must remain in each position approximately 10 seconds.
-
Then check the ATF level and top off, as necessary. Refer to => [ Automatic Transmission Fluid Level, Checking and Filling ] See: Automatic
Transmission Fluid Level, Checking and Filling.