volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 3170 > < Initial Inspection and Diagnostic Overview|Page 3168
Page 2
background image

‹› The following system/component checks depend on vehicle equipment level and market version.

The following components and functions can be checked via output Diagnostic Test Mode (DTM) of Comfort System Central Control Module:

‹› Left Rear Entry Light (W33)

‹› Left Rear Central Locking Lock Unit (F222) (central locking of left rear door is activated)

‹› Right Rear Entry Light (W34)

‹› Right Rear Central Locking Lock Unit (F223) (central locking of right rear door is activated)

‹› Tank flap activation (tank flap is opened)

‹› Rear lid activation (rear lid is opened)

‹› Vehicle Inclination Sensor Indicator Lamp (K188) (LED) in Interior Monitoring Deactivation Switch (E267)

‹› Interior Monitoring -Off- Indicator Lamp (K162) (LED) in Deactivate Vehicle Inclination Sensor Button (E360)

‹› Alarm Horn (H12)

-

Connect the (VAS5051B).

-

On the (VAS5051B), select "Guided Fault Finding".

-

Using the "Go To" button, select "Functions/Component selection" and the following menu options in sequence:

‹› Body

‹› Body repair procedures

‹› 01 - OBD capable systems

‹› Comfort system

‹› Functions - central control module for comfort system

‹› Comfort System Central Control Module -J393-, output Diagnostic Test Mode (DTM)

Initial Inspection and Diagnostic Overview|Page 3170 > < Initial Inspection and Diagnostic Overview|Page 3168