Passat Sedan V6-3.6L (BLV) (2008)
-
Install the (T10133/5) with the seal onto the fuel injector. Slide the seal farther on the injector using (T10133/6).
The seal is not in the groove yet.
-
Remove the (T10133/6) and the (T10133/5).
-
Slide the seal by hand into the ring groove.
-
Install the (T10133/11) on the injector.
-
Press the (T10133/7) over the seal to the stop on the (T10133/11).
-
Remove the (T10133/7).