Passat Sedan V6-3.6L (BLV) (2008)
-
Remove the spring - 1 - from the fuel injector and slide off (T10133/12).
-
Install a new support washer - 1 - onto the (T10133/13) and place this as shown on the injector.
-
Slide the support washer - 1 - with the (T10133/14) (the knurled side faces toward the fuel injector) onto the fuel injector up to the first groove -
arrow -.
-
Turn the (T10133/14) around (the knurled side no longer faces toward the injector). Slide the (T10133/14) over the support washer - 1 - in the -
direction of the arrow - to the stop on the (T10133/12).
-
Remove the (T10133/14).
The support washer is now the correct size.
-
Install a new spring - 1 - for (T10133/12) and place a new O-ring - 3 - in front of the support washer - 2 -.