Passat Sedan V6-3.6L (BLV) (2008)
Transmission Speed Sensor: Service and Repair
Transmission Output Speed Sensor
Transmission Output Speed Sensor
Removing
-
Remove the valve body. Refer to => [ Valve Body ] See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Valve Body/Service and
Repair/Valve Body.
-
Remove the bolt - 2 - for the transmission output speed (RPM) sensor (G195).
-
Remove the sensor from the transmission.
Installing
Installation is performed in the reverse order of removal. Pay attention to the following:
-
Press the sensor into the transmission until seated.
-
Install the bolt - 2 - for the transmission output speed (RPM) sensor. Tightening specification, refer to => [ Fastener Tightening Specifications ]
See: Specifications/Mechanical Specifications/Automatic Transmission/Transaxle/Valve Body, A/T/Fastener Tightening Specifications - Gears,
Hydraulic Controls.
-
Install the valve body. Refer to => [ Valve Body ] See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Valve Body/Service and
Repair/Valve Body.