Passat Sedan V6-3.6L (BLV) (2008)
/Page-834003.png)
After the test is completed:
-
Connect the vehicle diagnostic tester.
-
Perform the vehicle system test, refer to "Guided Fault Finding" in the vehicle diagnostic tester.
-
End the vehicle system test, this will automatically erase all Diagnostic Trouble Code (DTC) entries which occurred during the assembly.
-
Generate a readiness code in conjunction with a road test.
Observe the safety precautions that apply to road tests.
-
Perform a vehicle system test again and repair any occurring malfunctions if necessary.
