Passat Sedan V6-3.6L (BLV) (2008)
Alarm Module: Service and Repair
Radar Interior Monitoring Control Module 1 (G303)
Radar Interior Monitoring Control Module 1 (G303)
Special tools, testers and auxiliary items required
‹› Trim Removal Wedge (3409)
‹› When removing and installing components in a visible area (switches, covers, trim, etc.), mask off the areas at which a prying tool ((3409),
screwdriver) will be positioned, using commercially available adhesive tape.
Removing:
-
Switch ignition and all electrical consumers off and disengage the key or ignition switch in position 0 (ignition off).
-
Carefully remove trim - 1 -.
-
Remove screws - 1 -, release retainers - arrows B - and remove interior light module from headliner opening - direction of arrow A -,
considering length of available cable.