volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Body Control Module|Testing and Inspection > < Body Control Module|Description and Operation|Page 265
Page 1
background image

Body Control Module: Description and Operation
General Information

Comfort System Central Control Module (J393)

The comfort system central control module is located behind the glove compartment.

All access/start authorization functions are actuated via the comfort system central control module. Refer to => [ Comfort System Central Control
Module ] See: . 

It is necessary to adapt the Access/Start Authorization after replacing the comfort system central control module.

‹› If the comfort system central control module is to be replaced, the work procedure => [ Comfort System Central Control Module, Replace and

Coding ] See: Testing and Inspection/Programming and Relearning/Comfort System Central Control Module (J393), Replace and Coding to read
out the codes stored in the module must always be performed.

‹› After replacing comfort system central control module, other functions of Comfort System Central Control Module such as Anti-theft Immobilizer,

Anti-theft Alarm System, access and start authorization, tire pressure monitoring and central locking system key must also be adapted, depending
on vehicle equipment. 

‹› In this case, start by adapting the Anti-theft Immobilizer, refer to => [ Anti-Theft Immobilizer Control Module, Adapting ] See: Accessories and

Optional Equipment/Antitheft and Alarm Systems/Testing and Inspection/Programming and Relearning/Anti-Theft Immobilizer Control Module
(J362), Adapting and then the other equipment-dependent functions of access and start authorization in any order.

access and start authorization, removing and installing, refer to => [ Comfort System Central Control Module ] See: Service and Repair/Comfort
System Central Control Module (J393).

Body Control Module|Testing and Inspection > < Body Control Module|Description and Operation|Page 265