Passat Sedan V6-3.6L (BLV) (2008)
/Page-108003.png)
See Repair Manual, Repair Groups 69 and 72, for detailed information.
The following software program will address the topic concern, using the procedure below.
^
Connect the Midtronics IN-Charge-940 to battery to ensure a constant voltage between 12.5 and 14.5 volts during flash procedure.
^
Connect VAS 5052 or VAS 6150 tester to OBD connector.
^
Verify airbag indicator light is illuminated and that code 02511 014-Seat Occupant Recognition Control Module Faulty is stored in Air Bag -15-.
^
Switch the ignition OFF.
^
Remove OBD Cable from vehicle and scan tool.
^
Connect VAS 6103 cable to serial port RS-232 as shown.
^
Connect cable VAS 6103/2 to Cable VAS 6103.
^
Connect remaining OBD connector on VAS 6103/2 to the vehicles OBD diagnostic port.
