volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Scan Tool Testing and Procedures|Page 456 > < Scan Tool Testing and Procedures
Page 2
background image

‹› Activation of turn signal in front passenger's side mirror (Front Passenger's Exterior Mirror Turn Signal Lamp (L132)) 

‹› Activation of front passenger's side ambient light (Front Passenger's Entry Lamp (in outside mirror) (W53))

‹› Activation of front passenger's side window regulator (driving down) 

‹› Activation of front passenger's side window regulator (driving up) 

-

Connect the (VAS5051B).

-

On the (VAS5051B), select "Guided Fault Finding".

-

Using the "Go To" button, select "Functions/Component selection" and the following menu options in sequence:

‹› Body

‹› Body repair procedures

‹› 01 - OBD capable systems

‹› Front passenger door electronics

‹› Front passenger door control module functions

‹› Output Diagnostic Test Mode - Front Passenger Door Control Module -J387- 

Left Rear Door Control Module (J388), Output Diagnostic Test Mode

Left Rear Door Control Module (J388), Output Diagnostic Test Mode

Special tools, testers and auxiliary items required

‹› Vehicle Diagnosis, Testing and Information System (VAS5051B)

‹› The following system/component checks depend on vehicle equipment level and market version.

The following components and functions can be checked via output Diagnostic Test Mode (DTM) of door control module:

‹› Actuation of left rear switch illumination

‹› Activation of left rear window regulator (driving down)

‹› Activation of left rear window regulator (driving up)

-

Connect the (VAS5051B).

-

On the (VAS5051B), select "Guided Fault Finding".

-

Using the "Go To" button, select "Functions/Component selection" and the following menu options in sequence:

‹› Body

‹› Body repair procedures

‹› 01 - OBD capable systems

‹› Left rear door electronics

‹› Functions of Left Rear Door Control Module

‹› J388 - Left Rear Door Control Module - output Diagnostic Test Mode (DTM)

Right Rear Door Control Module (J389), Output Diagnostic Test Mode

Scan Tool Testing and Procedures|Page 456 > < Scan Tool Testing and Procedures