volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Front Seat Belt Height Adjuster|Page 7115 > < Front Seat Belt Height Adjuster|Page 7113
Page 4
background image

Installation

-

To install, perform the steps used for removal in reverse order. 

-

Connect vehicle battery.

Front Seat Belt Latches

Seat Belts

Front Seat Belt Latches

‹› The following describes removing and installing the seat belt latch on the left seat. Removing and installing the right seat belt latch is identical. 

‹› Removal and installation procedure for seat belt buckles shown in illustration applies to all seat belt buckles in vehicle.

Removal

-

Remove front seat. Refer to => [ Front Seat ] See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Front Seats

-

If present, disconnect wiring harness - 1 - from seat frame.

-

Remove bolt - 2 - (20 Nm).

‹› The screw is micro-encapsulated and must be replaced every time it is loosened.

‹› Before new bolts are installed, the thread of the corresponding nut must be cleaned.

-

Remove the seat belt latch - 3 - from the mount in the seat rail - arrow -.

Front Seat Belt Height Adjuster|Page 7115 > < Front Seat Belt Height Adjuster|Page 7113